Vertical single stage inline Centrifugal Pump manufacturers & suppliers & Exporter

Pump Structure-Vertical single stage inline Centrifugal Pump

The non-self priming pump is easy for installation and maintenance. The motor shaft directly connects with the pump shaft through a coupling. The inlet and outlet are located at the pump bottom at the same plane. And pump adopts an innovative removable mechanical seal, and there is no need to disassemble the motor to replace the mechanical seal .This pump is divided into two types, with base plate and without base plate for models TD32 - TD150.

Quick Details-Vertical single stage inline Centrifugal Pump

Pump material

Cast iron & Stainless steel(AISI304, AISI316)

Motor

• Totally enclosed, fan-cooled, 2-pole standard motors

• 100% copper wire

• IE 2 motor (IE 3 on request)

• Protection class: IP55

• Insulation class: F

• Voltage: 3x220-240/380-415V 1x220-240V

• Available with single-phase motor(0.37KW – 3KW)

Operating conditions

• Liquid temperature: -15℃ - +120℃

• Max. operation pressure: 16 bar

Application Area-Vertical single stage inline Centrifugal Pump

• Hot & cooling water circulation, heating system

• Water supply&drainage for high-rise buildings, filtration and transfer at waterworks, pressure boosting in main pipeline

• Washing&cleaning system, boiler feeding, cooling water circulation

• Industrial boosting: process water system, high pressure flushing system

• Industrial application: conveying raw material, system pressurization distillation system, diverter, swimming pool

• Air conditioning system

• Irrigation: agricultural irrigation, spray irrigation, drip irrigation

• General pressure boosting in household

• Fire-fighting system, Industrial boosting, Industrial liquid transport

Model Implication-Vertical single stage inline Centrifugal Pump

Performance Table-Vertical single stage inline Centrifugal Pump
Pump model	Equipped with motor（kW）	Q（m³/h）	5	10	15	20	25	30	35
TD65-36/2	5.5	H(m)	39.2	39.1	38.9	38.2	36	31.8	24.8
TD65-48/2	7.5	H(m)	50.4	50.3	50	49.3	48	45.9	42.5

Pump model	Equipped with motor（kW）	Q（m³/h）	10	20	30	40	50	60	70	80	90
TD65-15/2	2.2	H(m)	17.9	17	15	10.7
TD65-19/2	3		21.7	20.8	19	15.2
TD65-22/2	4		25.1	24.7	23.9	22	17.5
TD65-30/2	5.5		32.4	32.1	31.5	30	26.1
TD65-34/2	7.5		38.6	38.2	37.6	36.4	34	29.6
TD65-40/2	11		43.4	42.9	42.3	41.4	40	37.6
TD65-50/2	15		53.6	53.3	52.7	51.6	50	47.3
TD65-61/2	18.5		63.1	63.2	63	62.3	61	58.8	54.8
TD65-67/2	22		68	67.8	67.7	67.5	67	65.8	63.4	59.7
TD65-83/2	30		85.4	85.1	84.6	83.9	83	81.7	80	77.8	74.2

Vertical single stage inline Centrifugal Pump

A vertical single stage inline centrifugal pump is a type of pump that is installed vertically, with the suction and discharge ports in line with each other. This configuration allows for a smaller footprint and easier installation in many applications. The main advantage of this type of pump is its simplicity - it only has one moving part, the impeller, which makes it very reliable.

The Shoufei Vertical Single Stage Inline Centrifugal Pump is designed to transfer clean, non-corrosive fluids in a wide range of industries. This pump is built with a stainless steel body and an impeller that is dynamically balanced for smooth operation. It also has a mechanical seal and an oil-free motor that makes it ideal for use in food and beverage processing, pharmaceuticals, and other hygiene-sensitive applications.

ShouFei Vertical single stage inline centrifugal pump is one of the most common pumps in industry. It is widely used in chemical, petroleum, textile, printing and dyeing, food processing, pharmaceutical, environmental protection and other industries.